Holes
|
The meaning of the distances is displayed in the
figure below:
- Length - Sets
the length of plate in shape direction of the purlin course.
- Height - Sets
the height of plate in vertical shape direction.
- Thickness -
thickness of the connecting plate.
- Number - Sets
the number of bolts in beam direction.
- W3 - Sets the
spacing of bolts in beam direction.
- W1 - Sets the
distance between the 1st bolt from the bottom.
- W2 - Sets the
spacing between the bolts.
|
Bolts
|
- Bolt
Style – Sets the bolt type (e.g. DIN 7990) for the connection,
selected from the drop-down list.
- Dia – Sets the
bolt diameter for the connection between roof girder and shape.
- Dia
Side – Sets the bolt diameter for the connection between shape and
purlin course.
- Workloose –
Sets the clearance for the connection.
- Create
cleat plate
– When checked, creates an additional supporting
plate perpendicular to the plate which can be determined separately.
-
– Opens Cleat Plate dialog for settings the
dimensions of the supporting plate.
|
Options
|
- Group – When
checked, the purlin socket and the roof girder are assigned to a construction
group. If the roof girder is already belonging to another construction group,
the purlin socket will be assigned to this other group.
- With
Bolts – When checked, the bolts are assigned to the roof girder
belonging to the construction group as well.
- Other
Side – When checked, the purlin socket is attached at the opposite
side of the purlin course.
- Weld – When
checked, the plate is welded to the roof girder.
- Weld
Style – Indicates the type of the weld seam being selected for
weld.
- Af
– Sets the thickness of the weld seam.
- Offset – Sets
the offset value for the bolted connection in longitudinal direction. This is
the offset of the holes to the center of the purlin in the direction of purlin.
Positive values, moves the drill holes in shape direction of the purlin course;
and negative values moves in opposite direction.
|
List
|
Displays the list of available database entries
for the current connection.
Select the desired connection by clicking an
entry. In the different list fields, the data on which the connection is based
are displayed.
|