General Setting
|
Settings for enabling plate and plate dimensions:
- Create
Plate – When checked, enables plate spacings and bolts settings.
- Round
Plate – When checked, sets as a weld plate.
- Length – Sets
the length of the bracket end plate.
- Width – Sets
the width of the bracket end plate.
- Thickness –
Sets the thickness of the bracket end plate.
- Offset(L/T) –
Sets the longitudinal and transverse offset values in respective fields.
|
Bolts
|
- Bolt
Type – Sets the bolt style from the drop-down list.
- Diameter – Sets
the hole diameter of the selected bolt from the drop-down list of bolt diameter
table.
- Workloose –
Sets the clearance between bolt and hole diameter.
- Additional
Length – Sets an additional length to the bolts extension outside
the nut.
- Slot
Length – Sets the slotted hole distance along longitudinal
direction.
- Rotate – When
checked, rotates the axis of slot.
- Turn – When
checked, the bolt direction is inverted. Available when not welded.
- Weld – When
checked, the shapes are welded, instead of bolting.
Note: When set
to Weld, disables the Bolts and Spacing settings.
|
Longitudinal Spacing
|
- Number – Sets
the number of bolts to be placed on the
X axis.
- Edge
Distance (w1) – Sets the distance from the start of the shape to
the center of the first bolt.
- Distance
Between (w2) – Sets the distance between the center of the bolts in
longitudinal direction.
- Edge
Distance (w3) – Sets the distance from the end of the shape to the
center of the last bolt.
Note: Applicable
for more than one Number of bolts.
|
Transverse Spacing
|
- Number – Sets
the number of bolts to be placed on the
Y axis.
- Edge
Distance (g1) – Sets the distance from the edge to the center of
the first bolt.
- Edge
Distance (g2) – Sets the distance between the center of the bolts.
- Distance
Between (g3) – Sets the distance between the center of the bolts.
|