Cope
|
You can either select an already stored cope template
or enter the cope data directly.
- Cope – When
checked, enables selecting from available cope templates. When unchecked,
enables cope settings.
- (Edit Cope) – Opens
the Cope dialog, where the cope settings are manipulated. You can create or
modify the cope template.
- Cope
Connection Shape – When checked, copes the connection shape when it
collides with the angle. sets how the connecting shape has to be coped. You can
select Upper Side, Lower Side or Both.
- Top
double sided – Cope the connection shape on both sides on top, even
if only one side collides.
- Bottom double
sided – Cope the connection shape on both sides below, even if only
one side collides.
- Always Cope –
Cope the connection shape always, even if there is no collision.
- Gap – Sets the
free cut gap distance of the cope in the connection shape to the angles.
|
Safety Copes
|
Here you can specify whether a safety cope has to be
carried out. In addition, the inserted angle can be shortened.
- Top
Left – Keeps a gap in the angle at the upper left side.
- Top
Right – Keeps a gap in the angle at the upper right side.
- Bottom
Left – Keeps a gap in the angle at the lower left side.
- Bottom
Right – Keeps a gap in the angle at the lower right side.
- Shorten
Complete Angle – Shortens the angle complete, or cuts only the
connecting side.
|