Dowel/Stud option
|
One out of four configurations is selected for a
bolt style.
- Hook – when
selected the anchor bolt style name and part list set to the default Hook
Dowel.
- Bend – when
selected the anchor bolt style name and part list set to the default Bent
Dowel.
- Round
Head – when selected the anchor bolt style name and part list set
to the default Round Head Stud.
- Hex
Head – when selected the anchor bolt style name and part list set
to the default Hex Head Stud.
|
Diameter
|
Sets the anchor bolt diameter. Click
[…] to select a database value for the
diameter for the anchor bolt(recommended).
|
Bolt Styles dimensions
|
The following dimensions are labeled by dimension
lines on the diagram:
- Hook related
dimensions:
- Hook
diameter
- Foot
length
- Bend related
dimensions:
- Head
(Round/Hex) related dimensions:
- Head
width - sets the head nut outer diameter.
- Head
height- sets the head nut height.
- Common bolt
dimensions:
- Total
length - sets the overall length for anchor bot, include both
extrusion and embedment length.
|
Name
|
Used to enter/select a name for the anchor bolt
style. Names you enter are saved to the drop down list provided.
Tip: Use
the
and
dialog controls to load or save a
style.
|
Workloose
|
Sets the hole tolerance.
|
Part list Entry
|
When on, the part is taken in the BOM/partlist.
|
Material/Grade
|
Sets the material grade taken from the material file.
|
Item Number
|
A user-defined value for an item number is set here.
|
Partlist Name
|
Sets the name formatting using naming variables for
BOM/partlists.
|
Export Name
|
Sets the name formatting using naming variables for
exports/transfers.
|
Placement Pattern
|
The fields vary depending upon the
Arrange Type is set.
- Arrange
Type – Select the general arrangement method for the pattern,
either
The placement pattern parameters change accordingly.
|
Rectangular Arrange Type
|
Two sets of values to describe the parametric
patterns along two axis. Both
X Direction and
Y Direction have the same parameters.
Note: To create a
linear pattern, leave the
the
Pattern field for the
Y Direction blank.
|
Polar Arrange Type
|
A set of values to describe a semi-circular or
circular pattern of anchors.
- Count – Number
of anchor bolts along this direction of the pattern (i.e., number of rows or
columns)
Tip: To create a linear arrangement
of anchors, leave the
Y Direction
Count field blank.
- Radius – Sets
the radius of the Anchor bolt circle.
- Start
angle – Defines the angle at which the first anchor bolt is
created.
-
Included – The angle
subtended between the first and the last anchor bolt created.
- Orientation –
The orientation values in the drop-down list control depend on the arrangement
type selected.
- In – all anchor
bolts are rotated with legs towards the center of the anchor bolt arc
segment or circle
- Out – all
anchor bolts are rotated with legs away from the center of the anchor
bolt arc segment or circle
|