Dimensions
|
- Selected
Column – Displays the column being processed at the moment.
- Plate
Width – Sets the width of the base plate
- Plate
Height – Sets the height or length of the base plate.
- Plate
Thickness – Sets the Thickness of the base plate, selected from
list or entered a fresh value.
- Grout
Thickness – Sets an additional space between the "Base Plate"
(point of reference) and lower edge base plate. Once you have entered the
supporting shape from the "Base Plate", all length dimensions will be adjusted
correctly.
- Horizontal / Verical
Offset – Sets the horizontal/vertical offset distance from the
midpoint of the column.
|
Options
|
- Align
Plane to Shape Normal – When checked, the plate is always attached
normally beneath the shape. If the shape is slanted in the space, the plate is
slanted as well.
- Shorten
Column – When checked, the column is shortened by the lining value.
- Roatet
flat steel – When checked, turns the steel plate by 90°. This
affects the dimensions.
- As
Polyplate – When checked, the base plate is
formed as poly-plate, instead of as flat bar.
|
Group
|
Group - When checked, the
shape and the plate are arranged to form a group.
- With
Bolts – When checked, the bolts are added to that group.
- With
Bolts - When checked, the bolts are also added to that group.
|