Holes
|
- Shape
Length - Sets the length of the shape in shape direction of the
purlin course.
- Number - Sets
the number of drill holes in shape direction of the purlin course.
- W3 - Sets the
axis distance in the case of two or more drill holes.
- Bottom
Offset - Sets the distance of the roof girder holes to the outer
edge of the purlin course.
- Height
Offset - Sets the distance of the drill holes in the purlin course
to the upper edge of the roof girder.
|
Bolts
|
- Bolt
Style – Sets the bolt type (e.g. DIN 7990) for the connection,
selected from the drop-down list.
- Dia – Sets the
bolt diameter for the connection between roof girder and shape.
- Dia
Side – Sets the bolt diameter for the connection between shape and
purlin course.
- Workloose –
Sets the clearance for the connection.
|
Options
|
- Vertical – When
checked, the shape is positioned in a perpendicular way in order to insert e.g.
a U-shape vertically.
- Turn – When
checked, the shape is rotated by 90° around the longitudinal axis.
- Group – When
checked, the purlin socket and the roof girder are assigned to a construction
group. If the roof girder is already belonging to another construction group,
the purlin socket will be assigned to this other group.
- With
Bolts – When checked, the bolts are assigned to the roof girder
belonging to the construction group as well.
- Other
Side – When checked, the purlin socket is attached at the opposite
side of the purlin course.
- Backer
Plates
–Sets the dimensions of backer plates in the
corresponding input fields -the Width and thickness of filter plate. These
plates have to be used between roof girder and purlin socket. If you enter the
value
0, no backer plates will be created.
- Offset – Sets
the offset value for the bolted connection in longitudinal direction. This is
the offset of the holes to the center of the purlin in the direction of purlin.
Positive values, moves the drill holes in shape direction of the purlin course;
and negative values moves in opposite direction.
|
Shape Type
|
Sets the shape to be used for the connection
(Standard, User Shape, etc.). Special shapes can be used as well. For selected
type, corresponding
shape class and
shape size are selected from the respective
list.
|
List
|
Displays the list of available database entries
for the current connection.
Select the desired connection by clicking an
entry. In the different list fields, the data on which the connection is based
are displayed.
|