Backer Plates
|
Creates additional backer plates automatically or according to
certain dimensions. When checked, inserts filler plate to the connection.
Enables the creation methods settings.
- According
dimension
– When checked, allows setting filler plate
dimensions manually.
- Thickness –
Sets the thickness of the filler plate, selected from the drop-down list.
- Width – Sets
the width of the filler plate.
- Length – Sets
the length of the filler plate.
- As
Polyplate– When checked, creates the filler plate as polyplate.
|
Top Plate
|
A cover plate can be created according to Girder in an automate
way, and further adjusted via dimensions. When checked, create a top plate.
Enables the creation methods settings.
- According
Beam– When checked, inserts the top plate parallel to the
connecting shape. Allows setting top plate dimensions manually.
- Thickness –
Sets the thickness of the top plate, selected from the drop-down list.
- Edge
Distance – Sets makes possible the input of the return of the curve
of the carrier edges.
- Offset – Sets
the height of the column above the connection. Enabled when
According Beam is unchecked.
- As
Polyplate– When checked, creates the top plate as polyplate.
|
Web Plates
|
Indicates the position of the web plate by means of
the option web plate left and web plate right.
- Web Plate
Left / Right– When checked, creates additional web plates in
respective side. Allows setting web plate dimensions manually.
- Thickness –
Sets the thickness of the web plate, selected from the drop-down list.
- Width – Sets
the width of the web plate.
- Length – Sets
the length of the web plate.
- Cnt./Dia – Sets
the number and the diameter of the drill holes respectively. The Hole Distance
and the horizontal and vertical offset of the web plate to the plate center can
be specified as well.
- Hole
Spacing – Sets the inner spacing between the holes of the web
plate.
- Horiz
/ Vert – Sets the horizontal and vertical offset distance of the
web plate to the plate center in respective fields.
- As
Polyplate – When checked, creates the web plates as polyplates.
|