Tensile, Shear, Moment
|
Here, you enter a maximum load for the connection (in
KN) for the corresponding load type. In the list, only the connections suitable
for these loads are displayed.
|
Table columns
|
Meanings of the list entries:
- Label - Lists
the standard designation of the connection
- Width - Lists
the width of the plate (parallel to the flange of the connecting shape).
- Thickness -
Lists the thickness of the plate.
- Length - Lists
the length of the plate (parallel to the web of the connecting shape).
- Horizontal -
Lists the number of drill holes in direction of the plate width.
- Vertical -
Lists the number of drill holes in direction of the plate length.
- bolt
Dia. - Lists the used bolt diameter.
- Bolt - Lists
the used bolt type.
- Stiffener -
Lists the additional stiffeners are required for this connection.
- Backer
Pl. - Lists the additional backer plates are required for this
connection.
- Top
Offset - Lists the top offset for this connection.
- Bottom
Offset - Lists the bottom offset for this connection.
- Af - Lists the
thickness of the weld seam at the flange.
- As - Lists the
thickness of the weld seam at the web.
- Tensile,
Shear, Moment - Lists the maximum loading of the connection.
|