Corner
|
used to modify the edges of a non-processed plate. In
addition, this can be useful for data export if modifications of the perimeter
are not supported there.
- - Adds another edge to the plate.
Typically, you select the plate at the vertex insertion position. A new contour
point will be created at the picked position, which can be moved using the
handles.
- - Deletes an edge from the plate.
- Exact point input -
Set this option to specify the distance value to the new corner after selecting
the insertion point.
|
Edges
|
- - Transfers the contour of a
plate to other plates.
- - Matches the basic polygon of a
plate processed by cuts to the current plate. The corresponding modifications
become superfluous and are deleted.
|
Miter cuts
|
- - Combines two plates by means of
a mitred cut. A bisecting line determines the cutting plane.
- - Combines two plates by means of
a mitred cut. The intersection points of outer and inner edges determine the
cutting plane.
- Don't
lengthen plates - When on, the miter cuts performed on plates that
do not intersect are only applied to the first plate selected. The second plate
is not lengthened or mitred.
- Gap - Specifies
a gap to be maintained between the plates at the miter cuts.
|