Web Cut
|
- Web
Cut – When checked, enables creation of web cut.
- Cutr
Radius – Sets the radius to the web cut.
|
Bolts
|
- Bolt
Type – Sets the bolt style from the drop-down list.
- Bolt
Diameter – Sets the hole diameter of the selected bolt from the
drop-down list of bolt diameter table.
- Workloose –
Sets the hole clearance of the desired drill holes, which usually consists of 2
mm.
|
Insert
|
- Upper (side) –
When checked, attaches the plate connection to the
upper side of the shape.
- Lower (side) –
When checked, attaches the plate connection to the
lower side of the shape.
- Upper
Inside – When checked, attaches an additional plate to the inner
upper side of the shape.
- Lower
Inside – When checked, attaches an additional plate to the inner
lower side of the shape.
- Left – When
checked, attaches the plate connection to the
left side of the shape.
- Right – When
checked, attaches the plate connection to the
right side of the shape.
- Diagonal – When
checked, creates a bolted connection at one upper side and a welded connection
at the other. For the lower side, it is just the opposite.
- Single
Side – When checked, attaches the splice joint to the side of the
second shape to be connected in the form of a welded connection.
|
Weld Plate
|
- Create
Plates – When checked, creates weld plate.
- Thickness
/ Length / Width – Sets the plate dimensions.
|
Groove Weld
|
- Groove
Angle – Sets the angle for groove used for weld.
- Weld
Style – Set the weld style selected from the available drop-down
list styles.
|
Group
|
- Group – When
checked, the web plate is assigned to a construction group together with the
shape to be connected. If the shape is already part of another component group,
the web plate will be assigned to the same group.
- With
Bolts – Enabled for
Group. When checked, the bolts are added to
that group.
|
Dimension
|
- Gap – Sets the
distance to support shape.
|