Handrail - Posts tab
Used to taper the post on top or bottom by means of cuts, so to reach a better adaptation to the base plate or to the handrail.
Two cuts are made, one at the outside and one at the inside of the handrail.
| Setting | Description |
|---|---|
| Top cut horizontal | Sets the horizontal length of the cuts at the upper end of the post. |
| Top cut vertical | Sets the vertical length of the two cuts at the upper end of the post. |
| Bottom cut horizontal | Sets the horizontal length of the cuts at the lower end of the post. |
| Bottom cut vertical | Sets the vertical length of the two cuts at the lower end of the post. |