Holes
|
The meaning of the distances is displayed in the
figure below:
- Length,
Thickness, Height and Width - Sets respective dimensions of the
purlin shoe.
- Number - Sets
the number of bolts in beam direction.
- W3 - Sets the
spacing of bolts in beam direction.
- Bottom
Length / Side Length
- Sets the straight parts of the purlin shoe in
beam / purlin side, respectively.
|
Bolts
|
- Bolt
Style – Sets the bolt type (e.g. DIN 7990) for the connection,
selected from the drop-down list.
- Dia – Sets the
bolt diameter for the connection between roof girder and shape.
- Dia
Side – Sets the bolt diameter for the connection between shape and
purlin course.
- Workloose –
Sets the clearance for the connection.
- e1 /
e2 – Set the distance of foot hole / side hole, respectively.
|
Options
|
- Group – When
checked, the purlin socket and the roof girder are assigned to a construction
group. If the roof girder is already belonging to another construction group,
the purlin socket will be assigned to this other group.
- With
Bolts – When checked, the bolts are assigned to the roof girder
belonging to the construction group as well.
- Other
Side – When checked, the purlin socket is attached at the opposite
side of the purlin course.
- User
Shapes – Enables using user shape for purlin shoe.
- Backer
Plates
–Sets the dimensions of backer plates in the
corresponding input fields -the Width and thickness of filter plate. These
plates have to be used between roof girder and purlin socket. If you enter the
value
0, no backer plates will be created.
- Offset – Sets
the offset value for the bolted connection in longitudinal direction. This is
the offset of the holes to the center of the purlin in the direction of purlin.
Positive values, moves the drill holes in shape direction of the purlin course;
and negative values moves in opposite direction.
|
List
|
Displays the list of available database entries
for the current connection.
Select the desired connection by clicking an
entry. In the different list fields, the data on which the connection is based
are displayed.
|