Min. Post Space Btwn
|
Sets the minimum post spacing distance between which
filler rod should be included. Post spacings less that this value will not have
filler rods inserted between them.
|
Edge Distance
|
Sets the distance from the post to the first filler
rod.
|
Distance Between
|
Sets the center-to-center distance between adjacent
filler rods.
|
Top Offset
|
Sets the start offset for the filler rod.
|
Bottom Offset
|
Sets the end offset for the filler rod
|
Side Offset
|
Sets the side offset for the filler rod.
|
Insert Position
|
Sets the position of filler rod placement with
respect to the horizontal rails:
|
Insert From / Insert To
|
Sets the element selected for the horizontal rail
shapes for the top and bottom of the filler rod ends.
|
Cut At
|
Select the location in the
Insert From and
Insert To shapes at which the filler rod
edge is cut:
- Outer Edge
- Inner Edge
- Center
|
Collision Type
|
Sets the method used for collision type when a
filler rod collides with a horizontal rail:
- Ignore – Makes
no change to either the filler rods or the horizontal rails.
- Divide – Cuts
the filler rods shapes above and below the horizontal rails.
- Drill
Through – Removes the holes from the horizontal rail element to
accommodate the filler rods.
-
Boolean operation – Makes boolean
operations to the filler rod and not to the rails.
-
Divide and boolean operation – Performs
the divide operation and processes any single rod with a boolean operation to
the rails (modifying the rods).
|
Drill Clearance
|
Enabled for
Drill Through and
Booleans ops collision type. Sets the side offset
clearance for the filler rods.
|
Straight Cut at Edge
|
Set this option to specify a straight cut at
collision ends of a filler rod (or filler rod segment in the case of dividing
at a horizontal rail collision).
|