Dimensions (Rounded Bar)
|
- Bar
Spacing – Sets the distance between two bars. A positive value
determines the spacing. A negative value is to be read as its absolute value.
The default is 100 or 4 depending on the units setting.
- Fit
Bar – When checked, sets the
Bar Spacing equal to fit the space
between support pipe and the end plate.
- Bar
Length – Sets the length of the bar. A positive value determines
the length. A negative value is to be read as its absolute value. The default
is 200 or 8 depending on the units setting.
- Shape
Type – Sets the strap type selected from the drop-down list of
types of installed shape database. The default is the
DIN_RUNDSTAH.
- Shape
Size – Sets the strap size for the current shape type, selected
from the drop-down list. The default is the
RD16.
|
Dimensions (Curved Cleat)
|
- Cleat
Width – Sets the width for the cleat plates. A positive value
determines the width. A negative value is to be read as its absolute value. The
default is 150 or 6 depending on the units setting.
- Cleat
Thickness – Sets the thickness for the cleat plates. A positive
value determines the thickness. A negative value is to be read as its absolute
value. The default is 10 or 0.5 depending on the units setting.
|