| Length Tolerance
|
Sets the tolerances to be used for comparing the
component parts. You can specify the values for line length as well as the
comparison of drill holes, lengths and weight.
Modifications are determined by means of a type of
comparison which is also used for positioning.
|
| Single Parts
|
- At
Changes – Sets the behavior of the single part position number at a
changed part.
- Don't delete Position
Number (Keep) – The position number is not changed.
- Ask to delete Position
Number (Confirm) – The position number is only deleted if this is
individually confirmed for each part.
- Delete Position
Number (Delete) – The position number is always deleted.
- Storing the position number
– Sets what has to happen with the invalid
(former) position number at a changed single part. Disabled for
Delete Position Number option.
- Don't Save the Position
Number (No Storing) – The position number is not changed.
- Ask to Saving Position
Number (Confirm) – The position number is only stored as original
position if this is individually confirmed for each part.
- Store Position
Number (Save) – The position number is saved as original position.
|
| Groups
|
Sets the behavior of the group position number at a
changed part. The possible specifications correspond to those for
Single Parts and are described there.
|
| Set modify flag when pos number
|
When set, the modification flag is turned "ON" whenever
there is valid modification to part irrespective of having or not "Position
Number".
|
