Used to create
bolts through the holes in the clamp plates in four positions.
Setting | Description |
---|
Bolt Settings
|
- Create – When
checked, enables creating bolts.
- Bolt
Style – Sets the bolt type from the installed bolt database's.
Select the required bolt type from the list. The default is the first type in
the list.
- Diameter – Sets
the diameter of the holes in the clamp plates. Enter a positive value to
determine the diameter. Default is 16 or 0.625 depending on the units setting.
- Workloose –
Sets the allowance for the hole workloose for the hole in the gusset plate.
Enter a positive value to determine the workloose. Default is 2 or 0.0625
depending on the units setting.
|