| Model Settings
|
- Description –
Defines the name of your part family here. The entry appears in the selection
list and the part properties.
- Pos
Prefix – Sets the pos. prefix, which appears in front of each
position number itself if the part belongs to this family.
- Color – Enter
the color of the part family here. Indicate the color number or select it by
clicking the
 (Select
color) button.
- Detail
Style – Enter the detail style to be assigned to a component part
belonging to this family. Enter the name of the detail style or select it from
drop-down list by clicking on the field.
Note: Assigning
detail styles normally should be done inside the
DetailCenter. If the
DetailCenter is open, the component
part list has to be updated after modification of shape properties.
|
| 2D Detail Settings
|
-
Linestyle
Selection – Sets the line type
determined for the 2D-depiction. The settings can be defined individually for
visible, invisible and center lines.
- Detail
Colour – Sets the color to be used for 2D depiction of the selected
line, or select it by clicking the
(Select
color) button. Clicking 2nd
(Reset
color) button rests it to a default color.
- Line
Types – Sets the line type to be used for 2D depiction of the
selected line.
Note: The 2D line
settings are only activated if the component parts are displayed in 2D. These
settings don’t have any effects on the model display.
|
 OK
|
Closes the dialog and save your changes.
|
 Cancel
|
Closes the dialog without saving changes.
|
 Help
|
Opens online help.
|
