Longitudinal Spacing
|
- Number /
Slot Length – Sets the number of bolts to be placed on the X axis,
and in the second field, sets the slot length.
- Inner
Distance (w1) – Sets the distance from the start of the shape to
the center of the first bolt.
- Inner
Distance (w2) – Sets the distance from the end of the shape to the
center of the last bolt.
- Distance
Between (w3) – Sets the distance between the center of the bolts.
Note: Enabled
for more than one Number of bolts.
|
Transverse Spacing
|
- Number
– Sets the number of bolts to be placed on the Y
axis.
- Edge
Distance (e1) – Sets the distance from the edge of the shape to the
center of the first bolt.
- Down Edge
Distance – Sets the distance from the edge of the Plate to the
center of the first bolt.
- Distance
Between (e2) – Sets the distance between the center of the bolts.
|
Bolts
|
- Bolt
Type – Sets the bolt style from the drop-down list.
- Diameter – Sets
the hole diameter of the selected bolt from the drop-down list of bolt diameter
table.
- Workloose –
Sets the clearance between bolt and hole diameter.
- Additional
Length – Sets an additional length to the bolts extension outside
the nut.
- Turn – When
checked, the bolt direction is inverted. Available when not welded.
- Weld – When
checked, the shapes are welded, instead of bolting.
Note: When set
to Weld, disables the Bolts and Spacing settings.
|