Style
|
Select the name of the output style. This output
style specifies the appearance of the output (i. e., which values are displayed
in which lines, the size and position of the columns, etc.).
The
Standard output style is created by the
program and therefore is always available. You can create and manage as many
styles as you like. Here you select a style and thus re-structure the list by
selecting a list entry.
|
Origin
|
Select whether the data have to be taken from normal
3D component parts or from 2D position flags.
|
List Type
|
Select the type of parts list here.
- Create
Single Partlist – An entry is created for each element. The data
don’t have any reference to each other; the quantity of output parts
corresponds to the detected parts.
Note: The
determined number of groups is not taken into consideration for
selection.
- Group
List – Here the data are output separately according to groups and
the quantity of single parts is output as parts per group.
- Released
Group List – A
"real" single parts list is generated, taking
into consideration the number of parts depending on the quantity of the
corresponding group.
- Group
Header List – A list of only the group main part along with group
related values such as length, weight, etc.
|
Insertion Point
|
Use the drop-down list to select the position of the
parts list related to the previously selected insertion point.
|
Tolerances
|
Type the value to use as a tolerance range, by which
the length of component parts is compared and considered as identical.
|
Scale
|
Type the scale of the output. The size of the
complete list output can be increased or decreased.
|
Current Level
|
Set this option to generate the list on in the
current
level. Otherwise, it is generated on the
layer specified by
PS_TEXT in the configuration.
|
Update automatically
|
Set this option to let
ProStructures control the parts list
contents. When a element is modified or deleted which is contained in the parts
list, the list will be recalculated and updated.
Note: This option
may require some time for calculation. Therefore, you should thoroughly
consider whether you want to make use of this possibility and risk the
inconveniences of speed. You have always the possibility to update the list
manually.
|
Verify position number
|
If this option is activated only parts having a
valid position number will be evaluated.
|
Only group parts
|
If this option is activated only parts belonging to a
group will be evaluated.
|
Use TotalCount as GroupMultiplier
|
If quantities are used, the total amount will be
displayed.
|
Count = Count*GroupMultiplier
|
The displayed amount results from the number of
parts in a group multiplied by the quantity of these groups in the model.
|
Use total count in total values
|
If total values have to be used at output, the total
amount instead of the number is used at calculation.
|
Bolts without position number
|
If this option is activated, bolts having no valid
position number will be evaluated as well.
|
Washers extra
|
If this option is activated, washers will be
evaluated and listed as separate parts.
|
Nuts extra
|
If this option is activated, nuts will be evaluated
and listed as separate parts.
|
Safety washers extra
|
If this option is activated, safety nuts will be
evaluated and listed as separate parts.
|
Tapered Washers extra
|
If this option is activated, wedge washers will be
evaluated and listed as separate parts.
|
No weight for bolts
|
Bolts are displayed in the parts list without
indication of weight.
|
With Welds
|
Welds are displayed in the parts list.
|
Combine Welds
|
(Active when
With Welds option is set). When checked,
identical types of welds are added in the parts list to a common length.
|
Anchor Bolts
|
When checked, uses anchor bolt.
|
Anchor Bolts without pos. num
|
(Active when
Anchor Bolts option is set). When checked,
uses anchor bolts even if they has no valid position number.
|
Separate internal components
|
When checked, separates internal components in the
parts list.
|