Modify
|
Opens the Element Modification
dialog, which is used to make modifications to 3D model elements.
|
PROSTRUCTURE MODIFY
|
Shorten via
Pick
|
Used to shorten the length of
a shape by selecting two points to define the shortening distance.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
ProStructure
Shorten
bypoints
|
Shorten via
Enter
|
Used to shorten the length of
a shape by typing the shortening distance and then pressing <Enter>.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
ProStructure
Shorten
bykeyin
|
Lengthen via
Pick
|
Used to lengthen a shape by
selecting two points to define the added length distance.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
ProStructure
Lengthen
bypoints
|
Lengthen via
Enter
|
Used to lengthen a shape by
selecting typing the added length distance and then pressing <Enter>.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
ProStructure
Lengthen
bykeyin
|
Extend/Trim to
Line
|
The selected part is extended
to or trimmed at the selected line.
This is a shortcut tool to a
feature on the Element Modification dialog
Common tab.
|
ProStructure
Extend
toLine
|
Extend/Trim to
Object
|
The first selected part is
extended to or trimmed at the second selected part.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
ProStructure
Extend
toObject
|
Divide
|
Used to create two separate
shapes out of a single shape and a specified distance.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
ProStructure
Divide
|
Connect
|
Used to joint two separate
shapes into a single shape. Press and hold the <Alt> key to suppress a
shape check. Otherwise, the shapes must be of the same type.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
PROSTEEL
Connect
|
Notch
|
Opens the Notch dialog, which
is used to remove simple geometric shapes of outlets or countersunk parts into
shapes in your model.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
PROSTEEL
Notch
|
Round
Edge
|
Used to create a round edge for
a selected plate.
This is a shortcut tool to a
feature on the Element Modification dialog
Chamfer tab.
|
PROSTEEL
Round
Edge
|
PolyCut
|
Used to transfer the basic
polygon processed by cuts to the selected plate/object.
This is a shortcut tool to a
feature on the Element Modification dialog
Plates tab.
|
ProStructure
Cut
Poly
|
Cope
|
Opens the Cope dialog after
selecting the coped shape and the shape the cope should be automatically cut
for.
|
PROSTEEL
Cope
|
Moment
Cope
|
Opens the Cope dialog for a
selected shape and end. The cope dimensions must be manually specified.
|
ProSteel
Cope
Moment
|
Angle
Bisect
|
Used to create a mitred cut
for two intersecting shapes.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
PROSTEEL
Mitre
|
Chamfer Plate
Edge
|
Used to create a chamfer
corner for a selected plate.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
PROSTEEL
Chamfer
Corner
|
Insert Plate
Edge
|
Used to add a new corner, and
thus edges, to an existing plate.
This is a shortcut tool to a feature on
the Element Modification dialog
Shapes tab.
|
ProStructure
Add
Edge
|
Plate Editor
|
Used to select a plate and
open the Plate Editor dialog.
|
PROSTEEL
Edit
Plate
|