Add Chamfer to Connecting
|
Enables chamfer settings on the tab.
|
Equal Chamfer at Both Sides
|
Used to apply the same chamfer settings to both the
column and beam sides of the web plate. When on, the
At Beam settings are disabled, and the
At Column settings set chamfers for both
sides.
|
At Column
|
When on, the chamfer is added at top and bottom
corners of the web plate closer to the column.
|
At Beam
|
When on, the chamfer is added at top and bottom
corners of the web plate closer to the beam.
|
Layout
|
Defines the shape of the chamfer. Each layout is
sized using the
Radius/1st Edg and
2nd Edg settings.
- Straight
Chamfer - Constructs the chamfers with straight edge.
- Concave
Chamfer - Constructs the chamfers with an inwardly curved edge.
- Convex
Chamfer - Constructs the chamfers with a rounded edge.
|
Radius/1st Edg
|
Sets the size of the chamfers in the Y direction
(inline with the column).
|
2nd Edg
|
Sets the size of the chamfers in the Z direction
(inline with the beam).
|