Shapes
|
Unless having checked the
Use Polyplates field, you select here the
shape to be used for installation. You can select the shape according to the
shape categories in the lists.
- Shape
class – Sets the shape class from available options, selectable
from the drop-down list
- Shape
type – Sets the shape type for the safety cage (roof wall panel,
standard, user shapes, etc.)
- Shape
size – Sets the shape size from available options for given class,
selectable from the drop-down list
- Resolution –
Here, you select the resolution of the depiction Low , Normal and High for the
distributed shapes. You can change the resolution at any time afterwards if a
more detailed depiction is required for instance.
|
Plates
|
Used to set the dimensions in the Plate Width and
Plate Thickness input fields, the length corresponds to the ‘Grid Length’
corrected by the offset value.
-
Use polyplates – When checked, a
rectangular poly-plate is used as installation element instead of a shape.
- The
plate name field – Assigns the plate
selected from list to panel shape.
-
Grid – when checked, inserts surface
patterns of the plates. A plate grid (e.g. for a grating at the installation of
stage coverings) is created for being displayed.
-
Width – Sets the width of the plates.
-
Thickness – Sets the thickness of the
plates, selectable from the list.
|