Used to set the
stiffener type and dimensions.
Setting | Description |
---|
Stiffener Dimensions
|
- Stiffener
Type – Sets one of the stiffener types selected from the three
available types:
Chamfered,
Filleted and
Rounded.
- Thickness –
Sets plates thickness. It is shared by all created plates except Cleat plates.
A positive value determines the thickness. A negative value is to be read as
its absolute value. A zero value is not permitted. The default is 10 or 0.4
depending on the units setting.
- Flange
Distance – Sets the offset of the stiffener from flanges of the
shape. A positive value determines the offset. A negative value is not allowed.
The default is 0.
- Web
Distance – Sets the offset of the stiffener from web of the shape.
A positive value determines the offset. A negative value is not allowed. The
default is 0.
- End
Distance – Sets the offset of the stiffener from out edge of the
shape. A positive value determines the offset. A negative value is not allowed.
The default is 0.
- Stiffener
Radius – Sets the round radius of corners of the stiffener. A
positive value determines the radius. A negative value is to be read as its
absolute value. The default is 5 or 0.2 depending on the units setting.
- Size
Precision – Sets the precision of the rounding of the dimension of
the stiffener. A positive value determines the precision. A negative value is
to be read as its absolute value. The default is 10 or 0.4 depending on the
units setting.
|