3D Cuts
|
Custom options related to 3D cuts and external
contour.
|
Write 3D cuts (SC) as external contour (AK)
|
When checked (default), 3D cuts (SC) are written as
external contour (AK) to the output file.
|
Write both 3D cuts (SC) and external contour (AK)
|
When checked, then both 3D cuts (SC) and external
contour (AK) are written to the output file.
|
Shapes / Plates
|
Custom options related to shapes and plates.
|
Force external contour for all shapes
|
When checked, generates external contours in the
output file for all shapes (i.e., always added to the output file as an AK
block).
Default value:
checked.
|
Add edge preparation
|
When checked, considers edge preparation in output
file for plates.
Default value:
checked.
|
Write Pipe a unfolded plate (B Profile)
|
When checked, sets the solid round or pipe as B
profile shape. The pipe data is written as unfolded plate (B profile) to the
output file. Enables controls for
Number of Segment.. for unfolded pipe as per
machine least count.
|
Number of Segments for unfolded pipe / rod ..
|
Sets the multiplication factor for segmentation of
round profiles. This is the factor of Pipe / Rod diameter. Text box value
limited between natural numbers 1 to 10 as more number of segments lesser will
be the system performance. i.e. If a pipe has diameter 4" and segmentation
factor is "4" then it will be read as 4 X 25.4 (conversion from inches to mm) X
4 (user input).
Default value:
1.
Note: The number
should be between 1-10, and a natural number; values > 4 will increase
processing time.
|
Others
|
Custom options for other features.
|
Maximum hole diameter
|
Sets the maximum hole diameter to be reported as
drilled. Any hole diameter that exceeds this value will be reported as an inner
contour.
Default value:
4" (Imperial units),
100mm (Metric units)
|
Write inclined hole data
|
When checked, the inclined hold data is written to
the output file.
|
Make straight end as start
|
When checked, uses the straight end as the start end
while creating the output file.
|
Units group
|
Units to be considered while generating the output
file
- Millimeter —
Default output file units, in mm.
-
Inch — Sets output file units as Inch.
|
Precision
|
Sets the number of decimal points to use for
precision to be used in generating the output file.
Default value:
2.
|
Reset All
|
Resets all control to default values (i.e.,
according to DSTV specification).
|