Create left/right rail
|
When checked, a handrail is added to the staircase.
Left rail - allows creating rail along stairs at the left cheek, and Right rail
- allows at the right cheek of the staircase.
|
Simplified display
|
When checked, the handrails are not modeled, but
displayed in a wire frame as system lines.
|
Handrail connection
|
Specifies the type of connection for bolting of
handrail and staircase cheek.
-
Automatic – The program tries to
determine the most suitable fastening.
-
Vertical - The handrail is always bolted
on the staircase cheek from above, independently of the settings in the used
handrail template.
-
By Side – The handrail is always bolted
laterally on the staircase cheek, independently of the settings in the used
handrail template.
-
Individual – The settings in the
handrail template are used.
|
Start Offset
|
Sets the offset value which moves the start of the
handrail from the front edge of the staircase to the back. Negative values move
the handrail to the front. In case of staircases without basic stair head, you
can move the start of the handrail to a position where a bolt mounting is
possible.
|
End Offset
|
Analogously to start offset, sets an offset value
for the end of the handrail.
|
Side Offset
|
Sets an offset value that moves the handrail from the
outer edge of the staircase to the outside. This permits you to mount the
handrail outside the staircase on other shapes or on the wall.
|
Height Offset
|
Sets an offset value that moves the handrail from the
upper edge of the staircase cheek to the top. This permits you to attach a
grout or an individual fastening.
|
Side Offset
|
When set a positive value, a vertical connecting
plate is inserted between plate and staircase cheek in case of lateral
mounting. Used when the flats are selected as stringers.
|
Handrail Template
|
The template to be used for the handrail is picked
from the selection list. This template describes the exact structure.
|
Edit handrail settings
|
Opens Handrail settings where
the handrail structure (shapes, distances, etc.) is set or to edit the used
handrail template. The selected template is active for the current handrail.
Note: At staircases
with handrail, this handrail will be created as structural object of its own.
This permits you to construct and modify the handrail in detail independent of
the staircase.
|