Stairs - Base Flight tab
Used to set overall dimensions and positioning of the base flight.
Setting | Description |
---|---|
Width | Sets the width of the staircase across outer edge. |
Length | Sets the entire length of the stair construction. |
Height | Sets the height of the staircase from starting point to upper edge stair head. |
Thickness | Sets the thickness of the staircase. |
Riser | Sets the desired rise per step of the staircase. |
Actual Riser | Displays the resulting exact rise of the steps; calculated based on the Riser value. |
Angle | Displays the resulting gradient of the staircase. |
Tread | The resulting exact treading depth of the steps; the calculated going of the stair. |
Riser Count | Displays the resulting number of steps. The count is dependent of Height and/or Riser value. |
Lower Landing Length | Sets the length of the lower landing. |
Upper Landing Length | Sets the length of the upper landing. |
Position | Sets the side of the wall to place the stair at leader line; selected from the available options: Top, Middle or Bottom. |