Shape Cuts
|
- Cut Top
to Stiffener – When checked, cuts the top flange to stiffener
- Both
Sides – Enabled for
Cut Top to Stiffener. When checked, cuts
the top flange on both sides.
- Cut
Bottom to Stiffener – When checked, cuts the bottom flange to
stiffener
- Both
Sides – Enabled for
Cut Bottomto Stiffener. When checked,
cuts the bottom flange on both sides.
|
Stiffener Cut
|
- Square /
Tilted Cut at Start – When checked, the Start cut of stiffener is
tilted or squared, instead of round.
- Square /
Tilted Cut at End – When checked, the End cut of stiffener is
tilted or squared.
|
Upper Edge / Lower Edge
|
Enabled when
Cut Top to Stiffener is unchecked.
- Chamfer – When
checked, the respective option sets the type of cut for the corner of the
Stiffener Plate.
- Rise
/ Run – Sets the rise and run distances relating to the cut.
- Fillet – When checked, the respective option sets the
type of cut for the corner of the Stiffener Plate.
- Radius – Sets
the radius of fillet curve.
- Max – When
checked, the maximum distance for the cut is calculated and implemented.
|