Bolts
|
- Bolt
Type – Sets the type of the bolt being created. The default is
DIN 7991.
- Flip
Bolt – When checked, created bolts are flipped.
- Bolt
Diameter – Sets the dimension of the holes. A positive value
determines the diameter.
- Workloose –
Sets the workloose of the holes. This value sets tolerance between hole
diameter and bolt diameter.
|
Groove Weld
|
- Groove
Angle – Sets the angle for groove used for weld.
- Weld
Style – Set the weld style selected from the available drop-down
list styles.
|
Bolts Longitudinal
|
Defines the number and distance of the bolts on the web of
the Connection shape.
- Number of
Bolts – Sets the number of the bolts in the direction of Connection
shape. Default is 1.
- Bolt
Distance – Sets the distance between two adjacent holes along the
direction of Connection shape. Default is 50 or 2, depending of the units
setting.
- Edge
Distance – Sets the offset of the center of the holes to the edge
of the plate along the direction of the Connection shape. The Default is 20 or
0.8, depending of the units setting.
|
Bolts Transversal
|
Defines the number and distance the bolts in the web of the
Connection shape along the Y-Axis of the Connection shape.
|