Inner Holes
|
- Drill
inner holes – When checked, creates inner holes of below specified
settings.
- Hole
Distance (width) – Sets the distance of the inner drill holes to
the X-axis of the shape.
- Hole
Distance (height) – Sets the distance of the inner drill holes to
the Y-axis of the shape.
- Hole
Diameter – Sets the diameter of the inner drill holes.
- Rotate
Slot – When checked, rotates the axis of slot.
- Slot
Length – Sets the slotted hole distance.
|
Outer Holes
|
- Drill
outer holes – When checked, creates outer holes of below specified
settings.
- Holefield
Width
- Number – Number
of drill holes of the outer hole field in the X-axis of the shape.
- Distance – Sets
the intermediate distance of the drill holes of the outer hole field in the
X-axis of the shape.
- Holefield
Height
- Number – Number
of drill holes of the outer hole field in the Y-axis of the shape.
- Distance – Sets
the intermediate distance of the drill holes of the outer hole field in the
Y-axis of the shape.
- Hole
Diameter – Sets the diameter of the outer drill holes.
- Rotate
Slot – When checked, rotates the axis of slot.
- Slot
Length – Sets the slotted hole distance.
Note: Outer drill
holes are only created if both axes have a valid description.
|
Offsets
|
- Horizontal / Verical
Offset – Sets the horizontal/vertical offset distance from the
midpoint of the foot plate.
|