Main
|
- Shorten
Shape 1 – Sets the length to be cut on the first shape. A positive
value determines the shorten length. A negative value will extended the first
shape towards the second shape. The default is 0.
- Gap – Sets the
gap between the end of two connecting shapes. A positive value determines the
gap. A negative value is to be read as its absolute value. The default is 5 or
0.2 depending on the units setting.
- Cleat
Thickness – Sets the Cleat plate thickness. A positive value
determines the thickness. A negative value is to be read as its absolute value.
The default is 10 or 0.4 depending on the units setting.
|
Weld Plate
|
- Create
Plates – When checked, creates Weld Plates.
- Thickness –
Sets the thickness. A positive value determines the thickness. A negative value
is to be read as its absolute value. A zero value is not permitted. The default
is 10 or 0.4 depending on the units setting.
- Length – Sets
the dimension of the Weld Plate along the direction of the X-Axis of the
connecting shape. A positive value determines the length. A negative value is
read as its absolute value. A zero value will match the length to the width of
the shape. The default is 0.
- Width – Sets
the dimension of the Weld Plate in the direction of the connecting shape. A
positive value determines the width. A negative value is to be read as its
absolute value. A zero value is not permitted. The default is 40 or 1.6
depending on the units setting.
|
Options
|
-
Group – When checked, the selected shape, plate and other created
objects are arranged to form a group. If the selected shape is already part of
an existing group then the created objects are added to that group.
- Flip
Bolt – When checked, flips the bolts.
- With
Bolts – When checked, the bolts are added to that group.
- Bolt
Type – Sets the type of the bolt being created. The default is
DIN 7990.
|
Web Cut
|
When checked, enables creating poly-cut on box beam.
- Cut
Radius – Sets the round radius of the corner of the Web Cut. A
positive value determines the cut radius. A negative value of value will be
read as its absolute value. The default is 30 or 1.2 depending on the units
setting.
- Cut
Length – Sets the length of the Flange Plate to the connect shape.
A positive value determines the length. A negative value is to be read as its
absolute value. A zero value is not permitted. The default is 300 or 12
depending on the units setting.
|