Load Points table
|
Lists the load points in the truss.
Columns:
- Points - Lists
the number given to the load points.
- X
Offset - Sets the offset distance for the point in the truss X
direction.
- BF - When on, a
load point is added to the bottom front chord.
- BB - When on, a
load point is added to the bottom back chord.
- TF - When on, a
load point is added to the top front chord.
- TB - When on, a
load point is added to the top back chord.
- Y
Offset - Sets the offset distance for the point in the truss Y
direction.
- Z
Offset - Sets the offset distance for the point in the truss Z
direction.
|
Add (point)
|
Adds a load point to the table.
|
Points Count
|
Adds point loads to the table based on the number
you enter in the adjacent field.
X Offset for each is automatically
calculated based on the length of the truss.
|
Remove (point)
|
Removes the selected point load from the table.
|
Same Offset
|
Sets
Y Offset for all point loads on the table
based on the value you enter in the adjacent field.
|
Show Load Points
|
When on, the load points are displayed in the model.
|
Force table
|
Under Construction (to be supported in the future): Load points in
the left points table will have one or more load case associations from the
right force table.
|