Main Part Dimensions
|
The main part of the component part group is
dimensioned with the most important dimensions like a single part.
|
Main Part First
|
The first dimension chains in the global dimensioning
area of the component part group are the dimension chains of the main part;
otherwise the dimension chains of the subpart
|
Direct at the Part
|
The dimension chains of the main part are attached
directly to the component part.
Normally, they are also attached in the global
area. In case of very extensive groups it is however reasonable to select this
option.
|
Sub parts in Elevation views
|
The position of sub parts in the group is
dimensioned.
|
Repeat Parts
|
When checked, the identical part dimensions within a
view, are dimensioned only once in transverse direction. When unchecked, each
sub part is dimensioned multiple times redundantly.
|
Include Main part
|
The position of the main part in a structural group
is also dimensioned as a sub part.
This option can be useful when dimensioning
interlaced structural groups (structural group with subgroups).
|
Sub parts in Section
|
The positions of sub parts in sections are also
dimensioned.
|
End Plate Dimensions
|
The additional tilt end plate details are
dimensioned like a single part as well.
|
Reference Point Assignment
|
When checked, the dimensioning of sub parts is related
to the reference point of the main part unless no other defaults were made at
the corresponding places. When unchecked, it is related to the outside edges of
the main part.
|
For Add-on Parts
|
Sub parts in component part groups are dimensioned
in separate local areas together with the most important dimensions like single
parts.
You can enter further specifications on a separate
page of this parameter group.
|
For Subgroups
|
Subgroups in component part groups are dimensioned
in separate local areas together with the most important dimensions like
component part groups.
You can enter further specifications on a separate
page of this parameter group.
|