Used to define the dimensions of walkway, plate and
internal members of the catwalk.
Setting
Description
Walkway Width
Sets the width of the plate. Enter a positive value
to determine the width. A negative value is to be read as its absolute value.
The default is 1000 or 40 depending on the units setting.
Internal Members
Primary
Dist – Sets the distance between primary shapes. Enter a
non-negative value to determine the primary distance. A negative value is to be
read as its absolute value. If 0 is entered, single primary shape will be
created at the midline of cat walk. The default is 0.
Secondary
Dist – Sets the distance between secondary shapes. Enter a positive
value to determine the secondary distance. A negative value is to be read as
its absolute value. The default is 1000 or 40 depending on the units setting.
Primary
Offset – Sets the offset between original point and the first
primary shape. The default is 0.
Primary
Offset – Sets the offset between original point and the first
secondary shape. The default is 0.
Plate
Plate – When
checked, creates a walkway plate along the outline smartline.
Grid – When
checked, creates a reference grid for the plate.
Thickness –
Sets the platform plate thickness. Enter a positive value to determine the
thickness. A negative value is to be read as its absolute value. Value of 0 is
not permitted. The default is 20 or 0.8 depending on the units setting.
Part
Label – Sets the part label of plate. The default is "Plate".
Insert Point
Sets the position of cat walk relative to smartline
you have selected.
One of the nine options can be selected from the
drop-down list; for example:
The
Left top option means the smartline will be
treated as the left top boundary line.
The
Center top option means the smartline will be
treated as center top boundary line.