Oblique Stiffeners
Stiffeners at Angle
Used to insert stiffeners into the shape in an oblique position. The distances refer to the outer corners of the stiffener plates.
Accessed from:In principle, the insertion of oblique stiffeners is the same as described for Stiffener tool, except for the fact that you are prompted to define a position line of the stiffeners. Click a (construction) line showing the orientation of the stiffeners.
If you key in
, you will be prompted to select the position line
during the input.
Identify shape
Enter insertion midpoint of stiffeners
Identify position line of stiffener