Type
|
Here, you enter the type of the position number.
- Numerical – The
position numbers are composed of numbers only.
- Alphabetical –
The position numbers are composed of letters only. The order then is A, B, ...,
Z, AA, AB, ... etc.
- Alphanumerical
(Mixed) – The position numbers are composed of a numerical and an
alphanumerical part. The numerical part is following the alphanumerical part,
the order is A1, A2, ..., A9, B1, B2 etc. The number of numerical positions can
be preset under ‘Limits‘.
- Macro – The
position numbers are composed of numbers, characters, or both.
|
Filter
|
If you want to position only certain component parts,
you can apply a filter defining which elements of your construction have to be
equipped with a position number or with a shipping number. Select the parts to
apply positioning to:
- All Parts
- Only Empty
- Only Changed
|
Last Concrete
|
The last number assigned to a concrete element.
|
Last Cages
|
The last number assigned to a rebar cage.
|
Last Rebars
|
The last number assigned to an individual rebar.
|
Increment
|
Enter the automatic increase in numbers (normally the
increment is 1).
For example, type
1 to assign the next integer. Type
10 to increment numbers by 10.
|
Next
|
Displays the next position number to be assigned.
Enter the single part position number that has to be added to the first part to
be positioned a new. The next positioning number assigned is the
"Last" (part or concrete, cages, rebar) number
plus the specified Increment.
|
Position Number Options
|
Opens the
Automatic Position Settings
dialog, used to filter and sort groups and parts.
|
Position Flag Styles
|
For Alphabetical and Alphanumerical types, opens the
Position Number Line dialog where when
Without I,O is checked, the 0 and 1 shall be
used with alphanumeric / mixed numeric position number. (For Macro type, opens
the
Positioning Macros dialog, which
is used to build macro for concrete, cage, and rebar.
|
Reset Position Numbers
|
Resets the manual positioning to standard values,
by setting the position number to standard values —Numerical: 0, Alphabetical:
A, Alphanumerical: A0. All these reset "last numbers" to 0, A, or A0 serve as
the "starting points" for assigning new position numbers.
|
Assign Bar Marks
|
When checked, assigns currently set bar marks to
rebar.
|
Open Bar Factory Setting dialog
|
Opens the
Bar Factory Settings dialog,
which is used to set bar markings to a given shape.
|
Automatic Position Buttons
|
Assign position numbers to all parts with the given
settings.
|