Butt Strap Form
|
- Butt
Strap Type
– Here you set the variant of the connecting butt
strap.
- Inserted - The
butt strap is welded into the pipe.
- Pipe Sliced -
The pipe is slit and the strap is welded at that point.
- Butt Strap
Sliced - The strap is slit and the pipe is welded at that point.
- T-Shape – A
T-shape section is welded onto the pipe. You can select a shape in the
Selection Lists depicted opposite.
- Endplates – A
head plate is welded onto the pipe and a butt strap is welded onto this head
plate.
- Butt
Strap Length – Sets the length of the strap.
- Butt
Strap Width – Sets the width of the strap.
- Butt
Strap Thickness – Sets the thickness of the strap.
- Offset – Sets
the overlap length of the pressure pipe and the strap.
- Subtraction gap
– Sets the width of the gap between pipe opening and butt straps.
- Create
Group with Pipe – When checked, forms a group out of a bracing.
- With
Bolts – When checked, inserts the bolts into the group.
|
Endplates
|
You can indicate further specifications for the head
plate, if you have selected 'Head Plate' as butt strap type.
- Width – Sets
the width or the diameter of the head plate.
- Thickness –
Sets the plate thickness of the head plate.
- Use
Polyplates – When checked, the head plates are created as plates.
- Type – Sets the
form type of the connection plate;
- Edge – a square
head plate is created with the same width as specified under
'Width'.
- Round – a round
head plate is created with the same diameter as specified under
'Width'.
|
Shapes
|
You can select the shapes in the selection lists, if
you have selected 'T-shapes' as butt strap type.
- Shape
class – Sets the class of the shape of connection plate.
- Shape
size – Sets the size of the shape of connection plate.
|