Detail Style-Dimensioning - Single Parts-US-Notch tab
Used to detail copes (notches) using standards common in the United States.
Dimensioning of cut-outs according to this scheme is often used in the USA and replaces a detailed dimensioning of outer contour for standard-shapes with copes at the end.
Setting | Description |
---|---|
Equal Copes only 1x | When checked, copes with the same dimensions are dimensioned only once. |
Create Remarks | When checked, an annotation is automatically added to the dimensioning to indicate identical copes. Enables remarks and type settings below. |
Remarks | Generally added annotation (if need be, it is replaced by automatically created annotations). |
Up/Below | Annotation which is added above and below in case of identical copes. |
Start/End | Annotation which is added at the beginning and at the end in case of identical copes. |
Type | Annotation which is added for more than two identical copes. |
Left /Right Side | Cope setting at left and right sides. |
measure selection | Select whether the dimensioning of the cope has to be indicated in the form Length x Depth of the cope or Depth x Length of the cope. |
Prefix | Type text to be placed in front of the dimension. |
Postfix | Type text to be placed after the measured dimension. |