To apply Fudge to Long Bar/Long bar Group
- Click the Fudge Rebar tool (Concrete > Drawing Production > 2D Rebar > Fudge Rebar).
-
Select the long bar.
The Fudge Rebar dialog box opens.
Check the "Select LongBar Group" option to fudge whole group of long bars.
- Select the Type of Fudge.
-
Select the Method of Fudge.
- Dynamics: Move the Long bar / Long bar group to required position on screen and accept the new position using left click. The Dialog remains opened after applying the Fudge and you can use it to apply fudge to other Long bar / Long bar group
- Distance: Specify the distance by which you wish to move the Long bar / Long bar group and accept by using left click. Move the bar to required direction and accept the position with left click.
- Bar Size: Specify the Bar Multiplier value and accept the input by using left click. Move the bar to required direction and left click to accept. Example- For Bar #15M, bar size is 16 mm. If Bar Multiplier value is 5 then Fudge distance will be 16 x 5 = 80 mm