Panel Dimensions
|
Dimension fields which are active for editing
depend on placement options.
- Width – Width
dimension of your precast panel. Enabled while
Dynamic Width is unchecked.
- Height – Height
dimension of your precast panel.
- Thickness –
Thickness (depth) dimension of your precast panel.
|
Options
|
- Offset
Distance – Required offset distance from the insertion point.
- Offset
Position – Select the position by which to place the panel: Left,
Middle, or Right.
- Panel
Overlap Type – Select the method of joining adjacent panels.
-
Overlap mode - Adjacent edges are
stopped at the point of intersection.
-
Cut Mode - Adjacent edges are cut
(mitered) at an angle so they come to a point.
- Width
Adjustment – Sets panel horizontal position; Right, Left or
Centered.
|
Dynamic Width
|
When checked, sets the panel width based on the
length of the line or smartline segments used for placing. This overrides the
Width dimension.
|
Reverse Poly
|
When checked, changes the selection of which wall
segment is stopped at the intersection point for walls added on a smartline
using Overlap Mode..
|
Single Precast Panel Placement Options
|
|