Front Stiffener
|
- Thickness –
Sets the thickness of the Front Stiffener Plate.
- Web
Offset – Sets the offset from the web of the front supporting
shape.
- Top /
Bottom Flange Offsets – Sets the offset from the inside flange of
the supporting shape.
- Top /
Bottom End Offsets – Sets the offset from the outer edge of the
supporting shape.
- Chamfer /
Filet / Round – When checked, determines the type of cut for the
inner corners of the Stiffener Plates.
- Distance (for
Chamfer) – Sets the distance
relating to the cut. If 0, the default values are retrieved from the
ProStructures database
- Radius (for
Filet / Round) – Sets the type of
cut for the corner of the Stiffener Plate.
|
Back Stiffener
|
- Back
Stiffener – When checked, a Back Stiffener Plate is created for the
supporting shape.
- Thickness –
Sets the thickness of the Back Stiffener Plate.
- Web
Offset – Sets the offset from the web of the supporting shape.
- Flange
Offset – Sets the offset from the inside surface of the supporting
shape.
- End
Offset – Sets the offset from the outer edge of the supporting
shape.
- Align to
Support Member – When checked, the Back Stiffener Plate is placed
perpendicular to the web of the supporting shape. When unchecked, it is aligned
with the Stiffener Connection Plate.
- Chamfer /
Filet / Round – When checked, determines the type of cut for the
inner corners of the Stiffener Plates.
- Distance (for
Chamfer) – Sets the distance
relating to the cut. If 0, the default values are retrieved from the
ProStructures database
- Radius (for
Filet / Round) – Sets the type of
cut for the corner of the Stiffener Plate.
|