Stiffener
|
When checked, stiffeners, on the side of the end
plate are inserted into the supporting shape at the level of the flanges.
|
Inner Stiffeners
|
When checked, creates additional stiffeners between
the already created stiffeners. In the input fields, you specify the number and
the distance to the upper and lower edge of the plate.
|
Support Stiffeners
|
The prerequisite for generating this stiffeners is
the use of a bottom flange haunch having a stiffener on the side of the bottom
flange haunch and a cover plate.
- Number / Offsets –
Creates number of additional diagonal ribs into the supporting shape. The
offsets of upper insertion and lower insertion start are set in respective
fields. With the Height entry, you define the distance of the lower insertion
point to the inner side of the flange.
|
Stiffeners at Bottom Flange Haunch
|
- Supporting
Shape – Here, you specify the stiffener in the supporting shape at
use of a bottom flange haunch.
- Connecting
Shape – Here you specify the stiffener in the connecting shape at
use of a bottom flange haunch.
|
(Edit Style)
|
Opens Stiffener dialog, used for insertion or
edition of stiffeners. Here, you can modify the values and create new
templates.
Note: The settings
for stiffeners cannot be made independently here. You only select a template
containing the necessary parameters.
The advantage is that you have to define a certain
kind of stiffener only once and then only select it by using its name. However,
you mustn’t forget that in case of modifying this page after having modified
this stiffener template the existing stiffeners are updated as well (i.e. they
will obtain the dimensions of the modified template).
|