Stiffener
|
- Create
Stiffner – When Checked, creates standard web stiffeners the other
side of the selected column shape.
- Stiffener
Type – Sets stiffener type from the drop-down list;
Chamfered,
Rounded, or
Filleted.
- Flange
Offset – Sets the offset of the stiffener from flanges of the
shape. A positive value determines the offset. A negative value is not
permitted. The default is 1 or 0.04 depending on the units setting.
- Web
Offset – Sets the offset of the stiffener from web of the shape. A
positive value determines the offset. A negative value is not permitted. The
default is 1 or 0.04 depending on the units setting.
- End
Offset – Sets the offset of the stiffener from out edge of the
shape. A positive value determines the offset. A negative value is not
permitted. The default is 1 or 0.04 depending on the units setting.
- Thickness –
Sets the web stiffener thickness. A positive value determines the thickness. A
negative value is to be read as its absolute value. A zero value is not
permitted. The default is 8 or 0.32 depending on the units setting.
- Radius – Sets
the round radius of corners of the stiffener. A positive value determines the
radius. A negative value is to be read as its absolute value. A zero value is
not permitted. The default is 5 or 0.2 depending on the units setting.
|