Wall shape
|
When checked, enables the shape controls. The shape
type and class selection lists provide option to set.
All shape attributes are available for selection.
- Shape type – Sets
the shape type for the wall connection (standard, user shapes, etc.)
- Shape class – Sets
the shape type for the wall connection. Class list varies based on the shape
type selection.
- Shape size – Sets
the shape size for the wall connection. Size list varies based on the shape
class selection.
|
Position
|
Sets the positioning of the wall connection
according to the cross beam.
-
Inner Eedge – Inserts the wall shape at
the inner edge of the upright and shows to the inside.
-
Centered
– Inserts the wall shape in axis position on the
height of upright axis.
-
Outer edge – Inserts the wall shape at
the outer edge of the upright and shows to the outside.
|
0 Degree
|
Sets the wall shape rotation. Rotates the shapes
around their insertion axis (in increments of 90°).
|
Mirror
|
When checked, mirrors the wall shape along Y-axis,
before insertion.
|
Distance to wall
|
Sets the distance between upright axes and wall
surface where the ladder has to be mounted.
|
Distance to floor
|
Sets the distance between the axis of the first wall
shape and the ground area of the ladder.
|
Distance between
|
Sets inner spacing of wall connection, as the desired
distance of the wall shapes. The program divides the distances between the
first and last wall shape regularly according to this specification and the
values are rounded up or down correspondingly.
|
Top distance
|
Sets the distance between the axis of the last wall
shape and the climbing out area of the ladder. This is the distance the end of
wall connection seen from the top of the ladder.
|