Gap and Bolts
|
- Gap (distance)
– Sets the distance between the two shapes to be respected.
- Bolts – Sets
the desired bolt style for the connection.
- Dia – Sets the
desired bolt diameter from the list or enter the value directly if this option
has been activated.
- Workloose –
Sets the hole clearance of the desired drill holes, which usually consists of 2
mm.
|
Insert
|
- Upper (side) –
When checked, attaches the plate connection to the
upper side of the shape.
- Lower (side) –
When checked, attaches the plate connection to the
lower side of the shape.
- Single
Side – When checked, attaches the splice joint to the side of the
second shape to be connected in the form of a welded connection.
- Upper
Inside – When checked, attaches an additional plate to the inner
upper side of the shape.
- Lower
Inside – When checked, attaches an additional plate to the inner
lower side of the shape.
- Diagonal – When
checked, creates a bolted connection at one upper side and a welded connection
at the other. For the lower side, it is just the opposite.
- Left – When
checked, attaches the plate connection to the
left side of the shape.
- Right – When
checked, attaches the plate connection to the
right side of the shape.
|
Group
|
- Group – When
checked, the web plate is assigned to a construction group together with the
shape to be connected. If the shape is already part of another component group,
the web plate will be assigned to the same group.
The group excludes inside plates.
- With
Bolts – Enabled for
Group. When checked, the bolts are added to
that group.
|
As Polyplate
|
- Upper /
Lower / By side – When checked, the upper / lower / side plates are
created as poly plates, respectively.
|