Dimension
|
|
Bolts
|
- Num. of
Bolts – Sets the number bolts.
- Bolt
Type – Sets the bolt type selected from the drop-down list.
- Turn – When
checked, the bolt direction is inverted.
- Diameter – Sets
the diameter of the bolt.
- Work
Loose – Sets the hole tolerance.
- Additional
Length – Sets the length of the bolt beyond the nut.
- Bolt
Circle – Sets the radius for the bolts.
- Offset
form Edge/ Center – Determines whether the Bolt Circle is to
calculated from the edge or the center of the selected shape.
- Weld – When
checked, the shapes are welded. Disables bolts settings.
|
Stiffeners
|
- Num. of
Stiffeners –Indicates the number of stiffeners. Always equal to the
number of bolts, unless
Weld is checked.
- Length – Sets
the longitudinal length of the Stiffeners.
- Thickness –
Sets the thickness of the Stiffeners.
- Rim Edge
Offset – Sets the offset from the outside edge of the flange.
- Base
Length – Sets the distance from the plate's surface to the bevel
edge.
- Base
Width – Sets the distance from the pipe's outside surface to the
bevel edge.
- Side 1/
Side 2 / Both – Determines the placement of the Stiffeners.
|