| Equipment to Copy
|
If the piece of equipment to be copied is not the
one selected, choose the correct piece from the drop down list in the
Equipment to Copy field.
|
| New Name
|
Used to enter the name of the new piece of equipment.
The new equipment name does not have to be pre-defined in the Equipment List.
If a name that already exists in the Equipment List is chosen, you are prompted
with:
"Equipment <equipment name> already exists.
Do you want to change it to match the copied values?"
PlantBuilder will not allow you to copy a
piece of equipment to a name that has been defined for a different type of
equipment.
|
| Include
|
You can choose what attributes of the equipment to
copy in this area of the dialog. Attributes that can be copied are: the
user-defined attributes (length, width, height, diameter, etc.); location;
nozzles; and nozzle location.
- Attribute
Values – The dialog opens with the Equipment Attribute Values
option greyed out because it is a redundant option.
- Location – When
de-selected, the Equipment Attribute Values becomes available and the Nozzle
Locations option is greyed out.
- Nozzles – When
de-selected, the
Nozzle Locations option becomes
unavailable.
|
| Location
|
The new piece of equipment can be placed with a new
location or by offsetting from the placement point of the original piece of
equipment. The type of placement is selected in this area of the dialog. The
new coordinates or offset values are then entered into the fields below.
|
| Open Equipment Editor
|
Opens the
Equipment Editor for the new piece of
equipment after the copy has been Accepted.
|
| File menu
|
Used to:
- Save the model
(Save Model);
- Save the model under
another name (Save Model As);
- Close the
dialog.
|
| Edit menu
|
Used to:
- Open the
Equipment Editor for the new piece of
equipment (Copied Equipment);
- Open the
Equipment List.
|
