Host [IP]
|
The service host IP. The IP of the network with which
you want to work. You can select
any which works with any connected network.
|
Host [Port]
|
The service port that listens to incoming WCF
connections. Used for export service.
Note: If you do not
know what ports to use, it is recommended that you use the defaults provided.
|
Timeout (min.)
|
Smart 3D site disconnection
timeout in minutes. Used to free allocated resources if no activity has taken
place.
|
Jobs in Parallel
|
If set to
auto, the service uses the maximum parallel
processes. It uses all the processor(s) core(s) (one process per core). It is
recommended that you use
auto for maximum performance.
|
Components per Job
|
The default is 1000. The value should not be set to
too large a number, as processing too many components in a single job could
result in an
"Out of memory" error; 1000 avoids such error. If
the value is set too low, performance may decrease. You can adjust the number
to one that is correct for the amount of memory available on your computer.
|
Verbosity
|
Controls the amount of information extracted from
SP3D. Values are:
- Low (default) -
The basic components, hierarchies, and sub-components (complex equipment built
from several independent sub-parts) are extracted for each filter that is
processed. The low value also includes the necessary relationships to build the
component's logical hierarchy
()
- Medium - The
information from low is extracted along with any catalog's specs and materials
data for each component.
- High - The
information from low and medium is extracted along with all connection
information.
- All - The
information from high is extracted along with catalog information for the
subparts of several component types (extracts Value Operator component as a
subpart of the Value component) and nozzle placeholder information for
equipment components.
|
Aspects
|
Controls how S3D Aspects are extracted to the
i-model. Aspects is turned off by default; therefore, a resulting i-model file
contains default component graphics grouped by levels according to the
component discipline.
Components
placed on a level according to their discipline.
When
Aspects is turned on, the resulting
i-model file contains all the available component graphics based on the various
aspects and assigned levels with the names corresponding to the original S3D
aspects names.
Components' graphics are
distributed between
"aspect" levels
Note: The aspects
that are invisible by default (Insulation, Operation, Maintenance, and
Centerline in image) have their corresponding levels turned off in the i-model.
|
Flattened EC schema
|
Uses a flattened (reduced) EC schema for i-models so
they easily be used in Design Review sessions. A flattened schema contains only
the basic classes. All i-model objects are reduced to these base classes.
|
Convert to OpenPlant EC schema
|
Convert components to OpenPlant EC schema.
|
Repository Path
|
Directory path where the Intermediate/cached export
files are placed. By default, it is
C:\ProgramData\Bentley\PlantSight Smart 3D Bridge
Extractor.
|
Apply / OK
|
If an administrator makes changes and applies them
with
Apply or
OK the Admin Console displays a message if
the
S3D is running.
- If you click
Yes, the updated settings are applied
and the server restarts.
- If you click
No, the updated settings are applied,
but the server does not restart. You should manually restart the server using
the standard Administrative Tools/Services console.
- If you click
Cancel, all changes are discarded.
|