PlantSight Help

Register a Facility

Note: All settings marked with an asterisk (*) must be completed before you can save the changes. Text fields have character limits, and are labeled accordingly.
SettingDescription
Number Sets the facility identification number. This Number will subsequently be used throughout PlantSight when referring to this facility.
Name Sets the facility name. This Name will subsequently be used throughout PlantSight when referring to this facility.
Industry Sets the facility industry. This Industry will subsequently be used throughout PlantSight when referring to this facility.
Type Sets the facility type. This Type will subsequently be used throughout PlantSight when referring to this facility.
Use Location When selected, the entered Engineering Location is used throughout PlantSight when referring to this facility.
Use Latitude/Longitude When selected, the specified Latitude and Longitude are used throughout PlantSight when referring to this facility.
Latitude/Longitude Sets the facility location. This Latitude and Longitude specification will subsequently be used throughout PlantSight when referring to this facility.
Add/Change/Reset Cover Picture Used to customize the image displayed on the facility tile. Supported image formats are .jpeg, .jpg, and .png, and the maximum size image allowed is 5MB. When a picture is added, the button changes to "Change Cover Picture", allowing you to select a different image. When a picture is added, a "Reset Picture" option is overlayed on the picture to reset the picture to the default state.
Register Saves changes, and registers (adds) the new facility.
Cancel Discards changes, and closes the dialog.