OpenUtilities Substation Help

To Break up Pavement Markings

  1. Turn off the levels for annotations such as callouts and notes.
  2. Turn off the levels that contain the overpass geometry and overpass pavement markings.
  3. Make sure the levels containing road geometry and road pavement markings are on.
  4. Create a stencil for road pavement markings.
  5. Turn on the levels that contain the next highest crossing overpass geometry and associated pavement markings.
  6. Turn off the levels containing all road pavement markings.
  7. Create a stencil for the overpass pavement markings.
  8. Repeat step 5 through 7 above for each situation where an overpass crosses another overpass.