To Create Transverse Alignment

The procedure to create a transverse alignment is as follows:

• User imports/reference/creates the alignments.
• User starts Create Transverse Alignment command.
• The command window will be opened.
  
  
  
  
• User selects the first alignment.
• User enters a start station or selects the station graphically on the first alignment.
• User enters an end station or selects the station graphically on the first alignment.
• User selects a different profile or resets for the active profile.
• User enters a start station or selects the station graphically on the second alignment.
• User enters an end station or selects the station graphically on the second alignment.
• User selects a different profile or resets for the active profile.
• User enters a vertical offset that will be used to move the transverse alignments in the z direction.
• User enters a drop interval which will be used to give a distance between two consecutive alignments

The command will create simple geometry between the selected main alignments. For complex geometries, the user can manually create them by using the provided options under the Civil tab from the OpenTunnel Designer workflow.